| Warranty |
The 20-Year, 120 MPH Perma-Tite Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 20 years, 120 MPH coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.
|
| Testing |
- Tested per ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code.
- Factory Mutual approved for wind uplift protection.
- Miami-Dade Approved (No. 23-0912.08 12/11/28) to comply with the “High Velocity Hurricane Zone of the Florida Building Code.”
|
| Standard Sizes |
Sizes range from 5 ¼" up to 12 ¾" face heights to accommodate multiple nailers and coverage requirements.- 5 ¼"
- 6 ¾"
- 8 ¼"
- 9 ¾"
- 11 ¼"
- 12 ¾"
|
| Accessories |
Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
|
| Available Materials |
Its unique design allows for covers to be manufactured in 24 ga galvanized steel, 22 ga galvanized steel, .040", .050" and .063" aluminum.
|
| Colors |
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30-Year Kynar 500® Finish Warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10-Year Kynar 500® Finish Warranty or a 20-Year Kynar 500® Finish Warranty is available upon request.
Anodized finishes are also available and come with a 5-year warranty (no warranty available for coil anodized finishing; Post-coat/Class 1 Batch Anodized is available with a 5-year warranty with an option to increase to a 10-year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Please note: Express colors available in shorter lead times for 24 ga., .040” and .050” only. Standard lead times, which may be longer, apply for 22 ga. and .063”.
|
| Competitively Priced |
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
|
| Concealed Splice Plates |
Interlocking, concealed splice plate design prevents splice plate migration under the panels. This creates a more aesthetically pleasing design compared to traditional cover plates or lap joints at the seams.
|
| Custom Capabilities |
Radius and specially fabricated products are available to meet the unique needs of each project.
|
| Efficient Design |
The fascia is provided in 12'-0" lengths with slotted fastening holes in the galvanized waterdam to allow for proper thermal movement of the materials and to ensure correct fastener placement and spacing. The raised button-hole on the vertical face of the waterdam makes it easier to install. Its snap-on design eliminates cumbersome clips and screws. All this provides quicker installations and lower labor costs.
|
| Watertight |
Its unique design reduces the possibility of membrane damage and provides formed edges at all critical wind up-lift pressure points. The free-floating aluminum compression clamp creates a positive seal, regardless of membrane irregularities.
|